- en
- de
EuroSprinkler AG has been a well-established manufacturer of innovative sprinkler technology products for many years. The EuroSprinkler QuickFit continues this tradition: This completely new combination of sprinkler, mounting clamp, and protective cap is installed ultra-quickly, without any complex welding processes. The name says it all: The QuickFit is simply positioned and screwed into place over the hole in the riser pipe using a U-bolt and two nuts. Protective cap? Simply press it onto the threaded ends. Click – done. That’s QuickFit!
THE INSTALLATION
Step 1
Bore Ø 22 mm, burr-free
Step 2
Positioning of mounting brackets
Step 3
Positioning of the tapping sprinkler
Step 4
Installation using a preset EuroSprinkler torque wrench
Step 5
simply press on the shielding hood
Step 6
Pre-assembled QuickFit, assembly time < 1 min
THE ADVANTAGES
Being a few centimeters shorter than the previously common combination of tapping clamp and screw-in sprinkler, it saves valuable space, e.g. in warehouse installations or underground garages.
No welding, no sealing. The QuickFit seals itself using its special EPDM gasket.
Welding sleeve/tapping clamp and sealing material are completely eliminated.
The extruded pipes are simply drilled. This eliminates the need for complex prefabrication, which is often located far from the installation site.
Simply attach it. If it gets damaged, it can be easily pulled off and replaced with a new cover in seconds.
Available with F3F ampoule (RTI 35) and therefore up to 25% faster than conventional ampoules.
Available for pipe diameters DN 32 and DN 40, with RTI value <30 and RTI 105, with K-factor 80 and K-factor 115, as spray and flat screen sprinklers in trigger temperatures of 57°C – 141°C for RTI <30 and 57°C – 182°C for RTI 105.
Supplied in an environmentally friendly cardboard box together with U-bolt, nuts and EPDM seal.
High-quality finish from quality manufacturing in Switzerland.
The QuickFit also features the EuroSprinkler-typical ejection spring and is of course VdS-certified.
🖫 The system “QuickFit” (DE)
🖫 Installation instructions for tapping sprinklers “QuickFit” (DE)
🖫 VdS Certificate G 423013 (DE)
🖫 CE-Certificate 0786-CPR-40371 (DE)
🖫 Drilling sprinkler ACSP 32 (DE)
🖫 Drilling sprinkler ACSP 40 (DE)
🖫 Drilling sprinkler ABFP 32 (DE)
🖫 Drilling sprinkler ABFP 40 (DE)
🖫 Drilling sprinkler ABSP 32 (DE)
🖫 Drilling sprinkler ABSP 40 (DE)
🖫 Drilling sprinkler ACFP 32 (DE)
🖫 Drilling sprinkler ACFP 40 (DE)
Sagmattstrasse 5
CH-4710 Balsthal
Fax + 41 62 386 18 40
info@eurosprinkler.eu
